Edgestitching Using The Seam Guide; Sewing Hem Edges - Bernina 570 QE User Manual

Practical Stitches
> Select the needle position at the desired distance to the edge.

6.16 Edgestitching Using the Seam Guide

When sewing parallel wider lines, it is recommended to guide the seam guide (optional accessory) along a
sewn line.
> Fit the Reverse Pattern Foot #1C.
> Tap «Practical Stitches».
> Select Straight Stitch No. 1.
> Loosen the screw on the back of the presser foot.
> Insert the seam guide into the hole in the presser foot.
> Adjust the width as required.
> Tighten the screw.
> Guide the folded edge along the seam guide.

6.17 Sewing Hem Edges

When using the Blindstitch Foot #5, it is recommended to set the needle position to the far left or right. With
the Reverse Pattern Foot #1C and Edgestitch Foot #10/10C/10D all needle postions are possible.
> Fit the Blindstitch Foot #5 or the Reverse Pattern Foot #1C or the Edgestitch Foot #10/10C/10D.
> Tap «Practical Stitches».
> Select Straight Stitch No. 1.
> Place the inner upper hem edge against the guide of the Blindstitch Foot on the right.
95