Using Cord With The Buttonhole Foot #3C - Bernina 570 QE User Manual

> Pull the cord ends into the slits.
> Lower the Buttonhole Foot with Slide.
> Sew the buttonhole in the usual manner.
> Pull the cord loop until the loop disappears in the bartack.
> Pull the ends of the cord through to the wrong side of the fabric (using a hand sewing needle) and knot
or secure them with stitches.
Using cord with the Buttonhole Foot #3C
Prerequisite:
• The Buttonhole Foot #3C is fitted and raised.
> Insert the needle at the beginning of the buttonhole.
> Hook the cord over the center pin at the front of the Buttonhole Foot.
> Pull both cords ends under the Buttonhole Foot to the back and place each a cord into a groove of the
sole.
Buttonholes
111