Adjusting The Hovering Height Of The Presser Foot; Programming The Button "Pattern End - Bernina 570 QE User Manual
Hide thumbs
Also See for 570 QE:
- User manual (208 pages) ,
- Instructions manual (254 pages) ,
- Workbook (70 pages)
Table of Contents
Advertisement
Setup Program
> Tap «Sewing Settings».
> Switch «Securing Stitches at the Start of the Pattern» on or off.
Adjusting the Hovering Height of the Presser Foot
The hovering height of the presser foot can be adjusted according to the fabric thickness from 0 to maximal
7 mm.
Set hovering height = fabric thickness + required clearance between the fabric and the presser foot in the
floating position.
> Tap «Home».
> Tap «Setup Program».
> Tap «Sewing Settings».
> Tap «Programming Buttons and Icons».
> Tap «Programming the Hovering Height of the Presser Foot».
> Adjust the distance between the fabric and the presser foot.
Programming the Button «Pattern End»
The presser foot can be positioned, the thread cut and the automatic securing can be programmed.
> Tap «Home».
> Tap «Setup Program».
> Tap «Sewing Settings».
> Tap «Programming Buttons and Icons».
> Tap «Programming the Button Pattern End».
52
Advertisement
Table of Contents
