Recovering Saved Data; Cleaning The Thread Catcher - Bernina 770 QE Manual

Setup Program
> Touch the icon «Maintenance/Update».
> Touch the icon «Update the machine».
UPDATE
> Touch the icon «Save data on USB stick».
> Touch the icon «Update» to start the update of the firmware.
Update
Update

Recovering saved data

If personal data and settings after a software update are not available anymore, they can be transferred to
the machine again afterwards.
The BERNINA USB stick (optional accessory) has been removed too early
NOTICE
Saved data cannot be transferred and the machine cannot be used.
> Remove the BERNINA USB stick (optional accessory) only after the saved data has been transferred
> Insert the BERNINA USB stick (optional accessory) providing the saved data and settings into the USB port
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
> Touch the icon «Maintenance/Update».
> Touch the icon «Update the machine».
UPDATE
> Touch the icon «Transfer saved data to machine».

Cleaning the thread catcher

In chapter «Maintenance and cleaning» there are additional illustrated step-by-step instructions.
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
68
– The icon is checkmarked in green.
successfully.
of the machine.
– The icon is checkmarked in green.