Using Quick Copy; Printing Additional Copies Using Quick Copy - Kyocera FS-C8100DN Advanced Operation Manual

Using the Operation Panel
To retrieve the stored job for printing, refer to Retrieving Jobs from Virtual Mailbox (VMB) on
page 2-19.
NOTE:

Using Quick Copy

This mode enables you to print the requested number of copies of a job, simultaneously storing the
job on the hard disk. When additional copies are required, you can reprint the required number of
copies from the printer operation panel.
The default number of print jobs that can be stored on the hard disk is 32. This value can be
increased to up to 50 from the e-MPS Configuration menu. For details, refer to Changing the
Maximum Number of Quick Copy/Proof-and-Hold Jobs on page 2-21. When the number of jobs
reaches the limit, the oldest job will be overwritten by the new one. When the printer is turned off, all
stored jobs will be deleted.

Printing Additional Copies using Quick Copy

1 Press [Menu].
2 Press
3 Press
4 Press
by the user name (Harold, in this example). The user name is
assigned when printing using the printer driver.
5 Press [OK]. A blinking question mark (?) appears before the user
name.
6
Press
example.
7 Press [OK]. The job name entered in the printer driver (Report,
in this example) appear with a blinking question mark (?) before
the letters.
8 Press
9 Press [OK]. The number of copies to be printed can be set. To
increase the copy count, press
press
10 Press [OK] to finalize the copy count. The printer prints the specified number of copies for the job.
2-16
The virtual mailbox can be used in PCL 6 emulation only.
or repeatedly until e-MPS > appears.
.
or repeatedly until >Quick Copy appears followed
or to display the desired user name, Arlen, in this
or to scroll to the desired job title.
.
; to decrease the copy count,
e-MPS
>Quick Copy
Harold
>Quick Copy
?Harold
>Quick Copy
?Arlen
>Arlen
?Report
>Report
Copies 001
>