Page Protect Mode - Kyocera FS-C8100DN Advanced Operation Manual

4 Press
5
Press [OK]. A blinking question mark (?) appears.
6 Select Portrait or Landscape using
7 Press [OK].
8 Press [Menu]. The display returns to Ready.

Page Protect Mode

The Page Protect Menu does not normally appear, however, Page Protect will be forcibly set to
On if a print overrun error occurs because the print job is too complex. When this happens, be sure
to reset Page Protect to Auto (default) in order to maintain the optimum use of printer memory.
1
Press [Menu].
2 Press
3 Press
4 Press
5 Press [OK]. A blinking question mark (?) appears.
6
Press
Press [OK].
7
8 Press [Menu]. The display returns to Ready.
Linefeed (LF) Action
This procedure instructs the printer what to do when it receives a linefeed code (0AH).
•
•
•
1 Press [Menu].
or repeatedly until >Orientation appears.
or repeatedly until Page set > appears.
.
or repeatedly until >Page Protect appears.
or repeatedly until Auto appears.
LF only: Linefeed is performed (Default).
CR and LF: A linefeed and carriage return are performed.
Ignore LF: The linefeed is ignored.
or .
Using the Operation Panel
>Orientation
Portrait
>Orientation
? Portrait
Page set
>Page Protect
On
>Page Protect
? On
>Page Protect
? Auto
>
2-39