Kyocera FS-C8100DN Advanced Operation Manual page 30

Using the Operation Panel
2 Hardware Information
This item shows various printer settings for hardware-related items:
3 Memory
This item shows:
4 Page Information
This item shows the page related items:
5 Installed Options
This item shows the options installed in the printer:
6 Network Status
This item shows the IP address, subnet mask address, and default gateway address for the network
interface card in the printer.
7 Emulation
This item shows all available emulations of the printer. The PCL 6 emulation is set as default when
the printer is shipped from the factory. The emulations are:
8 Consumable Status
This item shows the approximate level of remaining toner. When the value is 100, the toner
container is full. The closer to 0, the smaller the amount of remaining toner.
If you use non-original toner kit, the toner gauge measurement will not be indicated correctly.
9 Interface Information
This information shows the emulation and the default font for all interfaces installed in the printer.
2-14
• MP tray paper size and type
• Paper cassette size and type
• Duplex mode
• Buzzer control
• Host buffer size
• Sleep time timeout time
• Formfeed timeout time
• Standard memory in the printer
• Option memory slot status in kilobytes
• Total memory in the printer
• Current status of the RAM disk
• Tone mode, Normal or Fine
• Number of copies, from 1 to 999
• Total page count
• Hard disk
• Option ROM
• Memory card
• HDD Security
• PCL 6
• KC-GL
• KPDL3