Download
Share
Print this page
Kyocera FS-C8100DN Installation Manual
  1. Manuals
  2. Brands
  3. Kyocera Manuals
  4. Printer
  5. KYOCERA FS-C8100DN
  6. Installation manual
Kyocera FS-C8100DN Installation Manual

Kyocera FS-C8100DN Installation Manual

Data security kit (d) installation guide rev-1
Hide thumbs Also See for FS-C8100DN:

Advertisement

Quick Links

Download this manual See also: Operating Manual, User Manual
INSTALLATION GUIDE for Data Security Kit (D)
(for printer)
GUIDE D'INSTALLATION du Data Security Kit (D)
(pour les imprimantes)
GUÍA DE INSTALACIÓN para el Data Security Kit (D)
(para impresoras)
INSTALLATIONSANLEITUNG für Data Security Kit (D)
(für Drucker)
GUIDA ALL'INSTALLAZIONE del Data Security Kit (D)
(per stampanti)
Data Security Kit(D) 安装手册 ( 对于打印机 )
Data Security Kit (D) 設置手順書 （プリンタ用）
Data Security Kit (D)

Advertisement

loading

Related Manuals for Kyocera FS-C8100DN

Summary of Contents for Kyocera FS-C8100DN

  • Page 1 INSTALLATION GUIDE for Data Security Kit (D) (for printer) GUIDE D’INSTALLATION du Data Security Kit (D) (pour les imprimantes) GUÍA DE INSTALACIÓN para el Data Security Kit (D) (para impresoras) INSTALLATIONSANLEITUNG für Data Security Kit (D) (für Drucker) GUIDA ALL’INSTALLAZIONE del Data Security Kit (D) (per stampanti) Data Security Kit(D) 安装手册...
  • Page 3 [Installation procedure] English Before installing the Data Security Kit (D) (hereinafter called the Security Kit), turn OFF (O) the main switch on the printer and remove the power plug from the outlet. Supplied parts Unlike when the Security Kit is installed in a multifunctional system, when a hard disk drive has been A Spacer ............
  • Page 4 1. Open the left cover (1) and front cover (2). 2. Remove the two screws (4) and remove the 3. Open the upper cover (6). Remove the toner container (black) (3). upper left cover (5). 1. Ouvrez le carter gauche (1) et le carter avant 2.
  • Page 5 4. Remove the screw (7) and remove the 5. Remove the three screws (9) and remove 6. Remove the screw (12) and remove the rear operation panel unit (8). the lower operation panel cover (10). left cover (13). Remove the connector (11) from the operation panel unit and remove the operation panel unit (8).
  • Page 6 7. Remove the two screws (14) and remove the 8. Remove the two screws (16) and remove the 9. Remove the switch connector (18) from the upper rear cover (15). upper paper outlet cover (17). upper paper outlet cover (17) and remove the upper paper outlet cover (17).
  • Page 7 10. Remove the interface cover (19). 11. Remove the screw (20) and remove the rear 12. Remove the two screws (22). right cover (21). 10. Retirez le capot d’interface (19). 11. Retirez la vis (20) et retirez le capot arrière 12.
  • Page 8 13. Release the tabs (23) and remove the upper 14. Remove the three screws (25) and the 15. Insert the spacer (A) into the slotted hole in tray (24). cooling fan connector (26). Remove the the engine board. upper frame (27). 16.
  • Page 9 17. Install the removed parts to their original 19.Connect the power plug of the printer to an 20. Perform the Checking after installation positions. outlet and turn the main switch ON (|). procedure described on page 9. 18. Check that the hard disk drive (HD-5) is The printer starts up with the security mode installed in the printer.
  • Page 10 English Español [Checking after installation] Comprobación tras la instalación Checking with the message display Comprobación de la pantalla de mensajes 1. Press [MENU]. 1. Pulse [MENU]. 2. Press [ ] or [ ] to check that the Security > menu appears. 2.
  • Page 11 日本語 Italiano Controllo dopo l’installazione ［設置後の確認］ Controllo mediante il display dei messaggi メッセージディスプレイからの確認 1. Premere [MENU]. 1. ［メニュー］ キーを押す。 2. Premere [ ] o [ ] per verificare che venga visualizzato il menu 2. ▲または▼キーを押して、 「 セキュリティ>」 のメニューが表示される Protezione >. ことを確認すること。...
  • Page 12 Rev.1.0 2006.9 303KM56720...