Status Information - Kyocera FS-C8100DN Advanced Operation Manual

Using the Operation Panel

Status Information

Message
Self test
Please wait
Please wait
(Adding toner)
Please wait
(Calibrating)
Ready
Processing
Sleeping
Cancelling data
Skipping data
Waiting
FormFeed TimeOut
Paper Loading
Overwriting
Error codes
Refer to the Troubleshooting section in the Operation Guide.
Indicators in Message Display
Interface Indicator (INTERFACE)
The interface indicator shows the interface that is
currently in use:
PAR
USB
SER
NET
OPT
---
Each interface has a timeout time of 30 seconds (factory default) during which the other interface
should wait to receive a print job. Even after a print job has been completed on the interface, you
should wait for this period until the other interface begins printing the job.
2-4
Meaning
The printer is performing self-diagnostics after power-up.
The printer is warming up and is not ready. When the printer is switched
on for the first time, this message will take several minutes.
Toner is currently being replenished. This message may be displayed
during continuous printing of a large volume of pages which require a
large amount of toner such as with photographs, etc.
The color calibration function is being performed automatically as you
powered on the printer.
You can also execute this function manually on the operation panel. For
details, refer to Color Calibration on page 2-79.
The printer is ready to print.
The printer is receiving data to print. This is also shown when the printer is
reading a memory card, hard disk or RAM disk.
The printer is in Auto Sleep. The printer wakes from Auto Sleep whenever
a key on the operation panel and [GO] is pressed, the cover is opened or
closed, or a print job is received. The printer then warms up and goes
on-line. For details on Auto Sleep, refer to Sleep Timer Timeout Time on
page 2-67.
The printer is cancelling the data.
The printer is skipping the data.
The printer is waiting for the rest of print job before completing the last
page. Pressing [GO] allows you to obtain the last page immediately. Refer
to below.
The printer is printing the last page after a waiting period.
Paper in the paper cassette is being moved. This message may be
displayed if the paper cassette is inserted again after paper is loaded.
HDD is being overwritten. Refer to Data Security Kit (D) Operation Guide.
Parallel interface is in use.
USB interface is in use.
Serial (RS-232C) interface is in use.
(option)
Network interface is in use.
Network interface is in use. (option)
No interface is in use.
Ready
PAR A4 PLAIN