Kyocera FS-C8100DN Advanced Operation Manual page 23

GO Key
GO switches the printer between on-line and off-line. Use this key to:
• Toggle the printer's on-line and off-line states. You can temporarily stop the print job by
switching the printer off-line.
• Print and feed out one page when the printer displays Waiting.
• Recover from certain errors.
• Recover from Auto Sleep.
(Cancel) Key
This key is used to:
• Cancel a printing job. (Refer to Canceling a Printing Job on page 2-8.)
• Stop the alarm sound.
• Reset numeric values or cancel a setting procedure while using the menu system.
Menu Key
Menu lets you enter the menu system to change the setup and printing environment of the printer.
Pressing this key during a menu selection will terminate the selection and return the printer to the
normal operation.
Cursor Keys
The four cursor keys are used in the menu system to access an item or enter numeric values.
The arrow key with the question mark (
appeared on the message display. A help message will then appear to facilitate jam clearing in the
location.
OK Key
This key is used to:
• Finalize settings of numeric values and other selections.
• Set the paper source when Use alternative? is shown in the message display.
NOTE: If you hold down [OK] and press [Menu] when Ready is shown on this printer, the
AdministrationID menu will be displayed. This menu is the setting menu for administration under the
Account Management System and is normally not used. Press [Menu] to return to Ready.
) may be pressed when the paper jam message has
Using the Operation Panel
2-7