Cleaning And Maintenance - Bayer HealthCare CERTEGRA MEDRAD Stellant FLEX Operation Manual

Operation Manual
15

Cleaning and Maintenance

15.1 - In the Case of Saline or Contrast Media Spills
15.2 - Daily and In the Case of Visible Contamination
15.3 - Daily
15.4 - Monthly
15.5 - Annually
15.6 - Reinstalling the System in Another Room
WARNINGS
Electro-Mechanical Hazard - Serious injury or death may result from exposure to hazardous voltages
existing within the system.
Do not remove any covers or disassemble the injector.
Periodically inspect for loose or frayed cables, loose covers, cracks, dents, or loose hardware. Contact
Bayer or a local dealer for service or repairs.
Do not expose system components to excessive amounts of water or cleaning solutions.
Disconnect the system from line power when cleaning.
Hazard
Do not service or perform maintenance on the injection system while in use with a patient.
Performance Hazard - Serious injury or death may result from not maintaining the injection system per
instructions from Bayer.
System may not perform to specifications if not calibrated or maintained per instructions by Bayer.

CAUTION
Environmental Hazard - Patient injury could result from potentially hazardous system electronic
assembly material.
Dispose of system components or accessories properly. Follow local regulations for proper disposal or
contact Bayer for assistance.
NOTICE:
Electro-Mechanical Hazard - Equipment damage may result.
Do not soak or immerse any components in water or cleaning solution.
Do not expose system components to excessive amounts of water or cleaning solutions.
Perform routine cleaning and maintenance.
This section contains the recommended procedures for maintenance and an operational checkout of the system.
Routine maintenance and inspection:
Ensures continued performance of the injection system
Reduces the possibility of equipment malfunction
The system must be properly maintained to ensure it is in peak operating condition.
15 - 75