15
Cleaning and Maintenance
Electro-Mechanical Hazard - Serious injury or death may result from exposure to hazardous
voltages existing within the system.
Hazard
Performance Hazard - Serious injury or death may result from not maintaining the injection
system per instructions from Bayer.
Environmental Hazard - Patient injury could result from potentially hazardous system elec-
tronic assembly material.
Electro-Mechanical Hazard - Equipment damage may result.
This section contains the recommended procedures for maintenance and an operational checkout of
the system. Routine maintenance and inspection:
The system must be properly maintained to ensure it is in peak operating condition.
NOTE: If contrast media has leaked inside any component of the system, contact Bayer for service.
NOTE: Failures that occur due to lack of proper maintenance will not be covered under warranty.
NOTE: Bayer will make available upon request:
•
"In the Case of Saline or Contrast Media Spills"
•
"Daily and In the Case of Visible Contamination"
•
"Daily"
•
"Monthly"
•
"Annually"
•
"Reinstalling the System in Another Room"
•
Do not remove any covers or disassemble the injector.
•
Periodically inspect for loose or frayed cables, loose covers, cracks, dents, or loose
hardware. Contact Bayer or a local dealer for service or repairs.
•
Do not expose system components to excessive amounts of water or cleaning solutions.
•
Disconnect the system from line power when cleaning.
•
Do not service or perform maintenance on the injection system while in use with a
patient.
•
System may not perform to specifications if not calibrated or maintained per instructions
by Bayer.
•
Dispose of system components or accessories properly. Follow local regulations for
proper disposal or contact Bayer for assistance.
•
Do not soak or immerse any components in water or cleaning solution.
•
Do not expose system components to excessive amounts of water or cleaning solutions.
•
Perform routine cleaning and maintenance.
•
Ensures continued performance of the injection system
•
Reduces the possibility of equipment malfunction
• Circuit diagrams, components part lists, or other information that will assist qual-
ified technicians to repair components classified as repairable.
• On-site consulting or consulting references upon request.
WARNING
CAUTION
NOTICE
15 - 65