Bayer HealthCare CERTEGRA MEDRAD Stellant FLEX Operation Manual page 48

9 - 40
ii.
Select View All to see all saved protocols. (2)
iii. Select applicable protocol from list. (3)
iv. Review all protocol values. (4)
v.
Select OK to use or edit the protocol. (5)
vi. Refer to
8.3 - Recall a Saved Protocol
b. To create or edit a protocol:
i.
Select an arrow to create a phase. (1)
ii.
Choose a phase type from the list. (2)
iii. Add/edit volumes and flow rates. (3)
iv. Select a pressure limit. (4)
v.
Press Lock to lock the protocol. (5)
vi. Refer to
8.1 - Create or Edit a Protocol
NOTE: A blinking yellow indication will appear if a protocol is entered that requires more than 150 mL.
Refer to 8.1 - Create or Edit a Protocol
2.
Select Lock on the display.
NOTE: The icon on the display changes to Arm, and the injector head Protocol Lock indicator illuminates.
MEDRAD® Stellant FLEX CT Injection System with Certegra® Workstation
for further information.
1 3
Figure 9 - 2: Create a Protocol
for further information.
for further information.
4
2
5