Controller - Konica Minolta Magicolor 7300 User Manual

Controller

CPU
Resident
emulations
Fonts
Standard
interfaces
RAM
Optional RAM
Job
Accounting
Support
Controller
Software
Requirements
IBM, Power PC 405 Core (266 MHz)
PostScript—Level 3
PDF—1.3 Direct PDF Printing (hard disk required)
Type 1, Type 3, Agfa, CID, FSM, and TrueType
Ethernet—10BaseT/100BaseTX
Parallel—Centronics/IEEE 1284 bidirectional
USB—USB (version 1.1) Type B connector (PC only)
Type: PC-133-Compliant SDRAM DIMMs
Base system RAM: 256 MB
Total RAM: Upgradable to 512 MB
128 and 256 MB DIMMs
For information about DIMMs recommended for your
printer, see printer.konicaminolta.net/support (click on
"Answer Base"), or contact Technical Support. See the
Service & Support Guide on the Documentation CD-ROM
for sources of service and support for many areas of the
world. For the most up-to-date worldwide information,
check www.konicaminolta.net/printer/.
PageScope Light (printer-based service management,
web interface for the device administrator)
PageScope Net Care (server-based management for the
network/office administrator)
Printer-based Accounting (hard disk required)
AIDC
Agfa Balanced Screens for halftones
Microsoft Plug & Play
SNMP support
215