Konica Minolta Magicolor 7300 User Manual page 111

25
Insert the print unit in the direction indicated by the arrow
4 inch (10 cm) into the compartment.
26
Let go of the print unit handle, grab the knob with your left hand, and then
slowly slide the print unit as far as possible into the printer.
Do not force the print unit.
27
Make sure that four positioning pins on
the print units enter the positioning
holes in the frame of the printer.
28
Attach the print units' lock lever.
Holding the lock lever with both hands,
hook the right end onto the shaft
then pull it toward you
the right end is secured onto the shaft.
Replacing a Print Unit Assembly
, and
. Make sure that
about
103