Konica Minolta Magicolor 7300 User Manual page 193

2
Check that the media can be seen below the transparent media guide
inside the right-side door.
If the media can be seen, continue with step 3.
If the media cannot be seen, close the right-side door, and go to step 4.
Attention
Do not touch the wire
harness or connectors on
the inside of the right-side
door, as shown in the
illustration, otherwise the
electronic parts of the
printer may be damaged
by static electricity from
your body.
3
While holding down the green
misfeed-clearing lever at the
front of the manual feed tray,
slowly pull out the media.
Clearing Media Jams
185