Konica Minolta Magicolor 7300 User Manual page 158

3
Remove any tape and packing material from the lower feeder unit(s).
We strongly suggest that you save the packing materials in case
you ever need to move or ship the printer.
Attention
If two lower feeder units are to be installed, attach the units together,
and then connect them to the printer.
WARNING!
Your printer weighs approximately
consumables.
1
Grasp the handles of the printer, place the printer on top of the lower
feeder unit, and align the positioning pins on the lower feeder unit with the
holes in the bottom of the printer to stack them correctly.
If two lower feeder units are to be installed, first secure the two
together before securing them to the printer.
Attention
Be sure to lift the printer by correctly
grasping its handles, otherwise the
printer may be damaged or fall.
2
Slide out Trays 2 and 3 (and 4 if the second lower feeder unit is added).
The instructions below assume both optional lower feeder units are to be
added.
150
Be sure to have help when lifting and moving it.
Lower Feeder Units (Trays 3 and 4)
125.2 lbs (56.8 kg) with
or