Konica Minolta Magicolor 7300 User Manual page 38

5
Squeeze the front media guide to
slide it to fit the media size to be
loaded.
6
Fan a stack of approximately 500
sheets of media.
If the media is curled, flatten it
before loading it.
7
Align the edges of the media, and
then load it face up.
Often, an arrow on the package
label indicates the face-up (print)
side.
If you're loading letterhead, load
the letterhead or logo side
oriented toward the front of the
tray.
Do not load media above the
8
Slide the media guides against the
edges of the loaded media.
Attention
Always adjust the media guide after
inserting the media. A guide that is
not properly adjusted can cause
poor print quality, media jams, or
printer damage.
9
Close the tray.
If you have removed the tray from the printer, slightly tilt up the tray
to insert it into the rails to slide it back in.
10
In the printer driver, select Plain Paper and the appropriate size.
11
Print the job.
30
media limit mark.
Loading Media