Installing A New Fuser Unit - Konica Minolta Magicolor 7300 User Manual

4
Firmly grab the fuser unit with
both hands, and then pull it out
toward you to remove it.
Attention
Dispose of the used fuser unit in accordance with local regulations.
.

Installing a New Fuser Unit

1
Remove the new fuser unit from its box, and then remove the packing
material and packing tape, except the shipping brackets.
2
Holding the fuser unit with both
hands, fully insert it in the printer.
3
Tighten the two shoulder screws,
one on each side.
108 Replacing the Fuser Unit