17
Connect the other end of the
control harness connected to
Tray 2's upper connector to the
connector on the back of the
printer.
18
Plug the black 3-pin connector of power
supply harness A (with the core
attached) into a black socket at the
back of the printer, and then plug the
power supply harness A's white 2-pin
connector into the white PJ6 socket on
Tray 2's unit.
The 3-pin connector (black) can
be plugged into any of the three
sockets on the printer. As an
example, the illustration at the
right shows the connector
plugged into the lower-left
connector.
160
Lower Feeder Units (Trays 3 and 4)