Duplex Unit Kit; Kit Contents - Konica Minolta Magicolor 7300 User Manual

7
Attach the left-side cover, making
sure that the three tabs fit into the
holes in the printer frame.
8
Make sure the two controller access
clips
9
Reconnect the power cord, and turn
on the printer.
In compliance with UL
guidelines, "The appliance
inlet is considered to be the
main disconnect device."
10
Print a configuration page (Print
Menu/Configuration menu), and
verify that the total size of the RAM
installed in your printer is listed.

Duplex Unit Kit

The duplex unit kit consists of the manual feed tray and the duplex unit. The
following sections describe the installation procedure for both components.
Attention
In order to use the duplex unit for duplex printing, the manual feed tray
must be installed. Install the duplex unit before installing the manual
feed tray.

Kit Contents

Wire-releasing tool
Duplex unit
Manual feed tray
Connector cover
Duplex (2-sided) printing can be done automatically from Trays 1–4 with a
duplex option and enough memory installed. See "Duplexing" on page 33.
134
click shut.
Duplex Unit Kit