Media Pickup Roller for Trays 2
1
Pull out the tray.
2
Press down on the media-lifting
plate until it locks down.
3
Remove the C-clip
shaft for the media pickup roller (on
the right side of the tray).
4
Slide the shaft back
5
Remove the C-clip securing the
media pickup roller, and then
remove the media pickup roller from
the shaft.
6
Remove the new media pickup roller
from its packaging.
7
Place the used media pickup roller in the box and plastic bag that the new
roller came in.
Attention
Contact toner_recycle@bpus.konicaminolta.us for
recycling or disposal information.
114
securing the
to remove it from its holder at the front.
Replacing Media Pickup and Separator Rollers