Konica Minolta Magicolor 7300 User Manual page 145

8
Align the two tabs on the duplex
unit with the two holes in the
printer, and attach the duplex
unit.
When installing the
duplex unit, make sure
that the cable on the right
side of the unit is not
pinched between the unit
and the printer.
9
Open the cover of the duplex unit, and then tighten the two shoulder
screws on the inside of the cover to secure the duplex unit to the printer.
Firmly tighten the screws using a coin or screwdriver.
Duplex Unit Kit
137