Konica Minolta Magicolor 7300 User Manual page 144

5
Remove the cover on the
upper right of the printer.
Attention
Do not touch the wire
harness or connectors
on the inside of the
right-side door;
otherwise, the electronic
parts of the printer may
be damaged by static
electricity from your
body.
6
Unhook the three tabs on the
connector cover, and then remove
the cover.
7
Close the right-side door.
Since the removed connector covers and screws will be needed if
the printer must be transported again, keep them in a safe place
for future use.
136 Duplex Unit Kit