Replacing Media Pickup And Separator Rollers; Kit Contents; Media Pickup Roller For Trays 1 - Konica Minolta Magicolor 7300 User Manual

Replacing Media Pickup and Separator
Rollers
If a problem, such as a media misfeed, occurs in any tray (except the manual
feed tray), and the problem cannot be cleared by removing the media or
cleaning the media pickup roller, replace the media pickup roller. Be sure to
also replace the media separator roller at the same time.

Kit Contents

Media pickup roller
Media separator roller
Reinforcing plates (supplied with the media separator roller for Tray 1)

Media Pickup Roller for Trays 1

1
Pull out the tray.
2
Press down on the media-lifting
plate until it locks down.
3
Remove the C-clip
shaft for the media pickup roller (on
the right side of the tray).
4
Slide the shaft back
from its holder at the front.

Replacing Media Pickup and Separator Rollers

securing the
to remove it
111