Table of Contents
Advertisement
5.6 INJECTOR CODING
This function can write the identification code of the fuel injector into the ECU so that the ECU can recognize the new injector.
After the ECU or injector is replaced, the injector code of each cylinder must be confirmed or re-coded so that the cylinder
can better identify injectors to accurately control fuel injection.
In general cases, there is no need to perform the coding matching function after cleaning;
The identification of the fuel injector includes its working accuracy value and type value. When replacing an injector you need to
find the corresponding model for replacement;
At present, mainstream cars support injector coding functions.
The operation guidelines of the Injector Coding function are shown as below:
1.
Enter the Injector coding menu and choose relevant chassis models according to the vehicle being tested.
2.
Enter the Fuel injection nozzle injection volume adjustment menu.
3.
Read the note displayed carefully and press OK after the reading.
4.
Read and confirm the value stored in the cylinders.
25
Advertisement
Table of Contents
