Table of Contents
Advertisement
2. G
S
ETTING
TARTED
CONNECTING POWER
The scan tool may need to be charged before first use. Confirm the proper power adapter (either 120 VAC North American
or 240 VAC European version) is attached to the AC/DC charger.
Plug the AC/DC charger into a wall outlet
Plug the USB cable into the AC/DC charger and also into the scan tool's micro-USB charging port.
Note: a fully discharged battery will take approximately 6 hours to fully charge. The scan tool can be used while charging.
ACTIVATION
After first-time users press and hold the power button to turn on the system, the system will automatically enter the guided
process and request the user to select the language for the operating system.
After setting the system language, click Next to enter the Wi-Fi connection page, as shown below:
Select a network to connect to on the Wi-Fi connection page. You need to enter the Wi-Fi password to establish Wi-Fi
connectivity and the activation page, as shown in the figure below. You can also click the "Trial" button in the upper right
5
Advertisement
Table of Contents
