Table of Contents
Advertisement
5.
Enter the Change the value of cylinder menu of the replaced injector(s), enter the new 5-digit value, and then press
OK.
Wait until the message 'Write successfully' pops up.
6.
Turn off the ignition switch.
7.
Wait until the message asks you to turn on the ignition switch.
8.
Re-enter the Fuel injection nozzle injection volume adjustment menu to check whether the new value(s) are shown.
5.7 DPF REGENERATION
The Diesel Particle Filter (DPF) function manages DPF regeneration, DPF component replacement teach-in, and DPF teach-
in after replacing the ECM.
26
Advertisement
Table of Contents
