QMS 2060 Reference page 87

Error Handler is a diagnostic tool that identifies PostScript errors
encountered during a print job.
Menu Administration/Startup Options/Do Error Handler
Choices Yes—Load the Error Handler at power on.
No—Don't load the Error Handler.
Default No
Notes You must restart the printer before this change will take effect.
Refer to the PostScript Language Reference Manual (Adobe
Systems Incorporated, Reading, PA: Addison-Wesley, 1990,
ISBN 0-201-18127-4) for more information on PostScript
errors.
This submenu allows you to allocate the printer's memory (RAM)
among the various memory clients. The flexibility of defining memory
available to clients allows experienced users to optimize the printer's
performance according to a given set of conditions.
This section briefly describes each of the memory submenus and the
memory clients. See chapter 5, "Additional Technical Information," for
more detailed information on the printer's memory and what benefits,
if any, may result from adding memory to each client.
To find out how memory is currently allocated, print a status page
using the Status Page key on the control panel or check each client
individually in the configuration menu.
This submenu allows you to "quickly configure" the memory clients to
the settings which allow the printer to perform best.