QMS 2060 Reference page 67

Choices
Default
Notes
For information on options and defaults found in this menu, see chap-
ter 2, "Printer Configuration," in the QMS CrownNet System Adminis-
trator's Guide .
Use the Administration/Emulations menu to set the parameters for the
available printer emulations. Optional printing emulations appear only
if installed.
» Note: To choose an emulation or ESP for a particular interface, use
the appropriate interface menu in the Administration/Communications
menu.
Normal—Enables standard, ASCII (7-bit) hex protocol. Data is
sent and received in ASCII format. This mode is
recommended if you do not print binary data. It was designed
for data in the printable ASCII range. Print jobs can change
this setting through PostScript operators.
Normal Fixed—Enables standard, ASCII (7-bit) hex protocol.
Print jobs cannot change this setting through PostScript
operators.
Binary—Enables quoted binary communications protocol
(BCP). Print jobs can change this setting through PostScript
operators. Data in the printable ASCII range also prints.
Binary Fixed—Enables binary communications protocol
(BCP). Print jobs cannot alter change this setting through
PostScript operators. Data in the printable ASCII range also
prints.
Normal
See chapter 5, "Additional Technical Information," for a full
discussion of PS Protocol.