QMS 2060 Reference page 63

The emulation timeout is the maximum number of seconds emula-
tions other than PostScript (such as HP-GL, PCL 5e, and Lineprinter)
wait for incoming data.
Menu Administration/Communications/Timeouts/Emul Timeout
Choices
00000-99999
Default 00005 (5 sec.)
Notes A value of 00000 is the same as infinity (no timeout).
The print job timeout is the maximum number of seconds the printer
processes a print job before it ends the job.
Menu Administration/Communications/Timeouts/Job Timeout
Choices
00000-99999
Default 00000 (infinity, no timeout)
Notes A value of 00000 is the same as infinity (no timeout).
The ESP timeout is the maximum number of seconds the printer
waits to match an emulation before printing the job in the default ESP
emulation.
Menu Administration/Communications/Timeouts/ESP Timeout
Choices 00000-99999
Default 00003 (3 sec.)
Notes A value of 00000 is the same as infinity (no timeout).
Use the Administration/Communications/Parallel menu to set the par-
allel interface values used for printer-host communications.