QMS 2060 Reference page 46

To change the HP-GL emulation scaling percent, press the control
panel keys in the order shown in the following table. The printer
responds by displaying a status message or configuration menu in the
message window. A flashing cursor indicates the current input char-
acter in the message window.
Note: You may need to press the Next key more than one time to
»
advance through the list of selections or options.
Press to...
this
key...
Online/ Turn off the Ready
Offline indicator and
enable printer
configuration.
Menu Access the
configuration
menu.
Next Advance to the
Administration
menu.
Select Access the
Administration
menu
Next Advance to the
Communications/
Emulation menu.
Select Access the
Emulation menu.
For 1.5 seconds, the
message window
reads ...
IDLE
CONFIGURATION
OPERATOR CONTROL ADMINISTRATION
ADMINISTRATION
COMMUNICATIONS
EMULATIONS
and then it reads ...
IDLE
OPERATOR CONTROL
COMMUNICATIONS
EMULATIONS
ESP DEFAULT