Using The Control Panel - QMS 2060 Reference

Media Input
Default
Notes
Media Input
Your QMS 2060 Print System comes standard with one media cas-
sette and one media feeder. Using the control panel, you can select a
default media input source, chain these input sources, and name
them. See "Naming Media Inputbins" on page 4-61 for details on how
to name inputbins.
Selecting a Media Inputbin
Your printer has the following inputbins:
Upper Feeder
Optional Feeder
Multipurpose Tray
See the "Media Types and Weights" section of chapter 2, "Print
Media," for information on the types and weights of media.
The Operator Control/Inputbin menu allows you to select the default
tray or feeder (inputbin) from which media is drawn from the cassette
into the printer.
Menu
Choices
Default
4-22
001
Sets the default number of copies for all subsequent print jobs.
When power is turned off and then back on again, the number
of copies is restored to the default setting of 001.
The cassette holds approximately 250 or 500 sheets
of paper, depending on the cassette used.
The cassette holds approximately 250 or 500 sheets
of paper, depending on the cassette used.
The tray holds approximately 150 sheets of a variety
of print media.
Operator Control/Inputbin
Inputbin 1—Multipurpose tray
Inputbin 2—Upper feeder
Inputbin 5—Optional feeder
Inputbin 2
QMS 2060 Print System Reference