QMS 2060 Reference page 83

Two types of status pages are available.
Menu
Choices
Default
After you have identified the type of status page to print, use the Sta-
tus Page key on the printer control panel to print it.
Note: If you choose an advanced status page but only a standard
»
status page prints, the printer has run out of RAM. Either reallocate
memory among the memory clients (see chapter 5, "Additional
Technical Information") or add more memory to the printer (see
chapter 2, "Memory and System Software," in the Options guide).
Prints a calibration page.
Menu
Choices
Default
Notes
A header page is a separator page that prints before a print job to
help users sort their jobs. The information on the header page can be
customized.
Administration/Special Pages/Status Page Type
Standard—Lists printer identification information, paper
source, current memory configuration, timeouts,
communication settings, input buffer sizes, and all options.
Advanced—Contains the same information as the standard
status page as well as configuration menu settings, fonts, and
downloaded emulations.
Standard
Administration/Special Pages/Calibration Page
Yes—Prints calibration page.
No—Calibration page will not be printed.
Yes
See the Administration/Engine/Image Alignment menu for
calibration instructions.