Setting Up Hard Drive Mirroring (Advanced) - FLIR M44168 Instruction Manual

16 Using the Main Menu
2. Power up the eSATA hard drive enclosure first. Then power up the system.
3. Once the system is powered up, open the Main Menu and click
click Storage>HDD Manager. The eSATA hard drives will be shown below the hard
drives that are installed inside the system (SATA).
4. Click on the eSATA hard drive in the list. Click Format.
5. Select Storage to use the hard drive as a storage hard drive or Backup to use the
hard drive as a backup hard drive. Click OK to confirm.
6. Click OK again. The system will format the hard drive and restart.

16.3.21 Setting up Hard Drive Mirroring (Advanced)

A mirror hard drive can be used to automatically backup video footage recorded to the re-
cording (read-write) hard drive. When a mirroring hard drive is installed, the system can be
#LX400057; r. 1.0/24460/24461; en-US
and then
65