Configuring Email Alerts - FLIR M44168 Instruction Manual

Table of Contents

Advertisement

16
Using the Main Menu
3. Check Enable.
4. Under Domain Name, enter the Domain Name/URL Request your received in the
email after registering for DDNS.
5. Under User ID, enter your DDNS User Name.
6. Under Password, enter your DDNS Device password.
7. Click OK to save your settings.
NOTE
Please allow 10~15 minutes for the DDNS servers to update with your new DDNS address before at-
tempting to connect.

16.3.5 Configuring Email Alerts

You can configure the system to send out email alerts for motion detection or other events.
NOTE
To send out motion detection alerts, you must enable the Send Email option for motion detection on each
camera you would to receive alerts from. For details, see 16.3.7 Configuring Motion Detection, page 54.
NOTE
SMTP server connection information is required to set up email alerts. Contact your email service pro-
vider to retrieve your SMTP server information.
To configure Email Alerts:
1. From the Main Menu, click
2. Check Enable to enable email notifications.
#LX400057; r. 1.0/24460/24461; en-US
and then select Network>Email.
52

Advertisement

Table of Contents
loading

This manual is also suitable for:

M4400 seriesM441616

Table of Contents