Configuring Rs232 For A Ptz Keyboard - FLIR M44168 Instruction Manual

16 Using the Main Menu
To configure other display settings:
1. From the Main Menu, click
2. Configure the following:
• Transparency: Select the menu transparency.
• Time Display: Check to show the time on the monitor.
• Channel Display: Check to show the channel names on the monitor.
• Image Enhance: Check for the system to digitally improve the video quality on the
live display. This setting does not affect recordings.
3. Click OK to save changes.

16.3.24 Configuring RS232 for a PTZ Keyboard

You can use the RS232 connector on the system to connect to a FLIR PTZ keyboard (not
included) via RS232.
NOTE
When configuring your PTZ keyboard, the RS232 address of your system is set under Device No. in the
Main Menu> >General>General menu.
To configure RS232 settings for a PTZ keyboard:
1. From the Main Menu, click
#LX400057; r. 1.0/24460/24461; en-US
and then click Setting>Display>Display.
and then click Setting>RS232.
69