Load; Test; Bps - FLIR M44168 Instruction Manual

16 Using the Main Menu

16.2.6 Load

The Load menu shows you the network traffic your system is sending and receiving.
To access Load:
• From the Main Menu, click

16.2.7 Test

The Test menu allows you to test if your system can connect to other devices over the LAN
or Internet. You can enter the IP address of a device and click Test to determine if your
system can connect to it.
To access Test:
• From the Main Menu, click

16.2.8 BPS

The BPS sub-menu shows the bitrates of connected cameras. The bitrate is the amount of
data the camera is sending to the system.
#LX400057; r. 1.0/24460/24461; en-US
and then select Network>Load.
and then select Network>Test.
48