Table of Contents
Advertisement
16
Using the Main Menu
1. From the Main Menu, click
2. Select the hard dive you would like to format and then click Format. Click OK to
confirm.
3. Click OK to save changes. The system will restart to complete the formatting process.
16.3.19 Configuring Hard Drive Type
The system supports the following hard drive types:
• Read-write HDD: Normal recording hard drive.
• Read-only HDD: The system can playback data from this hard drive, but it will not re-
cord to it.
• Mirroring HDD: The hard drive will be used for mirror recording only. You must set up
mirroring recording before this feature will work.
To set the hard drive type:
1. From the Main Menu, click
2. Click the hard drive you would like to configure.
3. Under Type, select Read-write HDD, Read-only HDD, or Mirroring HDD.
4. Click OK to save changes. The system will restart to complete this operation.
16.3.20 Installing eSATA Hard Drives
The system can support up to 4 additional hard drives via the eSATA port. The drives must
be installed in a single eSATA external hard drive enclosure with its own power supply.
To install eSATA hard drives:
1. Shut down the system and connect the eSATA hard drive enclosure to the eSATA port.
#LX400057; r. 1.0/24460/24461; en-US
and then click Storage>HDD Manager.
and then click Storage>HDD Manager.
64
Advertisement
Table of Contents
