Setting Up Hard Drive Mirroring (Advanced) - FLIR DNR516 Instruction Manual

15 Using the Main Menu
3. Once the system is powered up, open the Main Menu and click
click Storage>HDD Manager. The eSATA hard drives will be shown below the hard
drives that are installed inside the system (SATA).
4. Click on the eSATA hard drive in the list. Click Format.
5. Select Storage to use the hard drive as a storage hard drive or Backup to use the
hard drive as a backup hard drive. Click OK to confirm.
6. Click OK again. The system will format the hard drive and restart.

15.3.22 Setting up Hard Drive Mirroring (Advanced)

A mirror hard drive can be used to automatically backup video footage recorded to the re-
cording (read-write) hard drive. When a mirroring hard drive is installed, the system can be
set to record cameras in parallel to both the recording hard drive and the mirror hard drive.
This way, the footage is automatically backed up if the recording hard drive fails.
#LX400023; r. 1.0/17332/17359; en-US
and then
70