Configuring Hard Drive Type; Installing Esata Hard Drives - FLIR DNR516P16 Instruction Manual

15 Using the Main Menu
3. Click OK to save changes. The system will restart to complete the formatting process.

15.3.20 Configuring Hard Drive Type

The system supports the following hard drive types:
• Read-write HDD: Normal recording hard drive.
• Read-only HDD: The system can playback data from this hard drive, but it will not re-
cord to it.
• Mirror HDD: The hard drive will be used for mirror recording only. You must set up mir-
roring recording before this feature will work.
To set the hard drive type:
1. From the Main Menu, click
2. Click the hard drive you would like to configure.
3. Under Type, select Read-write HDD, Read-only HDD, or Mirror HDD.
4. Click OK to save changes. The system will restart to complete this operation.

15.3.21 Installing eSATA Hard Drives

The system can support up to 4 additional hard drives via the eSATA port. The drives must
be installed in a single eSATA external hard drive enclosure with its own power supply.
To install eSATA hard drives:
1. Shut down the system and connect the eSATA hard drive enclosure to the eSATA port.
2. Power up the eSATA hard drive enclosure first. Then power up the system.
#LX400023; r. 2.0/23328/23328; en-US
and then click Storage>HDD Manager.
69