Example Ftp Transferring With Flash Fxp - 360 Systems INSTANT REPLAY 3 Operation Manual

Example FTP Transferring with Flash FXP

Flash FXP™ can be obtained at www.inicom.net.
Note: The version used for this example may be different than the current version.
Connect to Instant Replay
Start up Flash FXP. The listing on the right hand side shows local files on your
computers drive.
Make sure that FTP is set to ON in the Instant Replay (MENU->NETWORKING-
>FTP MODE->ON.
Click on the yellow Lightning Bolt then select Open Connection.
Instant Replay 3 Operations Manual Page 77