Rear Panel Connections; Audio Connections - 360 Systems INSTANT REPLAY 3 Operation Manual

 A short press of the power button (one to four seconds) initiates a normal
power shutdown.
 Continuing to hold the power button down will force the immediate power off
of the system.
Note: this method should only be used in the event that the unit cannot be
shutdown using the short press method or powering off from the main
interface.
 When the system is off, a short press of the power button will turn on the
system power.
Fuses
The fuses in this product are not user replaceable. Failure of a fuse is an indication
of other component failure, and will require service by a qualified repair technician.
Contact 360 Systems, or your 360 Systems distributor.

REAR PANEL CONNECTIONS

AUDIO CONNECTIONS

NOTE: The Balanced and Unbalanced analog inputs are mixed together. It is not
recommended that both be connected at the same time, unless one or the other is
muted.
Analog XLR Audio Inputs
The Balanced Analog Inputs are a pair of female XLR-3 connectors marked Left and
Right. Input cables should be wired as follows:
XLR Connector Pin
PIN 1
PIN 2
PIN 3
Analog XLR Audio Outputs
Page 50
INSTANT REPLAY REAR PANEL
Balanced Connection
COMMON
+ INPUT
- INPUT
XLR I O
NPUT AND UTPUT
Unbalanced Connection
GROUND
SIGNAL
No Connect
C
ONNECTIONS
Instant Replay 3 Operations Manual