Shuffle A Playlist; Using The Record Sample Rate Converter - 360 Systems INSTANT REPLAY 3 Operation Manual

Digital audio recorder-player

Hide thumbs

Table Of Contents

Table of Contents

 LOOP is turned off. If the clip is playing when LOOP is turned off, the clip will

stop when finished playing.

NOTE: The physical LOOP button on the keyboard only functions to loop clips.

Looping a playlist can only be done from the LOOP button in the PLAYLIST section

of the Home screen.

If a playlist is loaded, turning loop on in the CLIP section will obey the FOLLOW ON

mode. For example, with a playlist loaded and LOOP turned on, and FOLLOW ON

turned off (MANUAL), the loaded clip from the playlist will not loop. Instead is

simply remains the current clip and does not move to the next clip in the playlist.

Subsequent presses of PLAY will continue to play the same clip.

 If FOLLOW ON mode is turned on (AUTO), the loaded clip will continue to

loop until LOOP is turned off.

To loop a playlist, turn the LOOP button in the PLAYLIST section of the Home screen

on. The LOOP button in the CLIP section must be off in order for a playlist to loop.

As with looping a clip, the FOLLOW ON mode dictates what happens at the end of

the playlist.

 If FOLLOW ON is off, the Playlist will stop at the end of each clip and cue the

next clip in the list. At the end of the last clip in the playlist, the first clip is

recued. Play will restart the playlist playing again.

 If FOLLOW ON is on, the Playlist will play thought the entire list, then recue

and start playing the first clip again.

NOTE: The LOOP button in the CLIP section takes precedence over the LOOP in the

PLAYLIST section. In other words, if LOOP in the CLIP section is on, the current

clip will continue to loop even if playlist loop is on.

Using the two different LOOP buttons can open a variety of ways to control the

operation of clips and playlists.