Play A Clip Using A Hot Key; Play A Clip Using The Hot List; Creating A New Hot-List - 360 Systems INSTANT REPLAY 3 Operation Manual

From the Home screen, touch the SELECT CLIP button and in the Clip / Playlist
Selector screen, select a clip. Press Enter, OK or Play, or double-tap the clip. The
Home screen will show again and the clip will be loaded.
Press PLAY if you did not use it to confirm the selection.

Play a Clip Using a Hot Key

By far the easiest and fastest method is the use of the Hot Keys. Simply press an
assigned Hot Key for immediate playout. Hot Keys refer to the 50 numbered keys
on the front panel, each of which can be assigned a clip for playout allowing rapid,
on demand access to content.
Assigning a clip to a Hot Key
There are two ways to assign a clip to a Hot Key:
1. Pressing Assign Hot Key will open the Clip / Playlist Selector. Unassigned keys
are lit in blue, assigned keys show red.
a. Select a clip from the window and press the Hot Key that the clip is to
be assigned to. Assigned keys can be directly reassigned to different
clips.
b. Repeat step (a) until all desired clips are assigned.
c. Press Assign Hot Key again to turn the function of.
2. Assign clips through the Bank Manager screen.
a. Open the Bank Manager by going to the main Menu and selecting
MANAGE BANKS.
b. In the Bank Manager, select a key from the list and then select
ASSIGN.
c. This will open the Clip Playlist Selector and allow the selection of a clip
to be assigned. Pressing OK will set the clip to the previously selected
key.

Play a Clip Using the Hot List

Hot Lists allow the creation and playback of a sequence of clips that are assigned to
Hot Keys. Each Bank can have its own Hot List assigned but there can only be one
Hot List per Bank.

Creating a New Hot-List

 Press the Hot List button.
 Press a series of Hot Keys.
 Press the Hot List button again to complete the list.
 Press the Hot List button again and then PLAY to start the playout.
Page 56 Instant Replay 3 Operations Manual