Table of Contents
Advertisement
WARNING: This action cannot be undone and will result in a total loss of system
settings and Hot Key assignments on the system.
System Reset
WARNING: This process will remove all system settings, Hot Key assignments and
content from the system. Please make sure to backup the system first.
Selecting System Reset will reset the system back to factory defaults.
A prompt of OK or Cancel will be provided.
WARNING: This action cannot be undone and will result in a total loss of everything
on the system.
Firmware update
From time to time, 360 Systems may release updates to the system that may
include enhancements for better system operation or functionality. To install
updates on the system, please follow these steps.
WARNING: Please make certain that system content and settings are backed up
prior to any system update.
WARNING: Do not power off the system during the update process. The system will
be rendered unusable should this happen.
1. Obtain the appropriate software release by contacting
support@360systems.com
2. Place the software update file in the root directory of a USB storage key.
3. Place the USB storage key into the system.
4. From the main menu, select Utility Menu and then select FW UPDATE.
5. You will be prompted to confirm the update which will then automatically
update the system firmware.
6. Once the update is complete, the system will automatically reboot.
Page 66
Instant Replay 3 Operations Manual
Advertisement
Table of Contents
