Table of Contents
Advertisement
Transport Control Buttons
Function Buttons
Setup and Configuration Buttons
These controls are described briefly in this section.
Hot-Keys
The 50 Hot-Keys provide the primary functionality for play out on the system. There
are three functional uses for Hot-Keys:
1. Triggering playback of assigned Cuts
2. As an alphanumeric keyboard (in combination with the Navigation control
buttons)
3. Bank selection ( 1 through 50)
The main array of 50 buttons are Hot-Keys numbered 1 through 50. A Hot-Key's
primary function is to trigger playback of a clip assigned to the specific key. Hot-
Keys light up or change color whenever their assigned Cut is playing. In certain
modes, cued Hotkeys or Hotkeys with special operations pending will light in
different colors indicating their state or operation.
In the Bank Select mode, the fifty Hot-Keys are used to select the corresponding
Banks numbered 1 through 50. The banks are like pages of Hot-Keys. They extend
the number of clips that can be assigned to Hot Keys to 2500 (50 Hot Keys times 50
Banks ) and also provide a method for organizing clips.
Navigation Keys and Power Button
The bottom row of buttons on every screen allow the user to navigate to other
areas of the interface or allow certain actions to be completed. Note that
depending on the current state of the system, buttons may be enabled or disabled.
Power Button
The power button is located on the front panel.
A short press of the power button (one to four seconds) initiates a normal power
shutdown.
Continuing to hold the power button down will force the immediate power off of
the system.
When the system is off, a short press of the power button will turn on the
system power.
Page 14
Instant Replay 3 Operations Manual
Advertisement
Table of Contents
