Chapter 4 - Play & Record Operations; Playing A Clip; Load And Play A Single Clip - 360 Systems INSTANT REPLAY 3 Operation Manual

The USB port on the side of the LCD screen does not provide sufficient voltage to
operate larger USB memory storage devices. Please use the rear USB ports.
WARNING: Failure to follow this notice may result in damage to the device and void
the factory warranty.
The USB ports do not support mounting the Instant Replay internal storage on
another device.
USB keyboard and mice connected to the system will act simply as a normal input
device for the display. This can provide additional ease of use when setting up and
operating the device.
Inserting a USB storage device containing music content, will allow the user to copy
or move files to and from the Instant Replay 3 to the USB device. Please refer to
the section on file management for additional information.
GPIO Ports
Instant Replay 3 has a high density 26 pin connector that provides GPIO
connectivity. Please refer the GPIO wiring diagram and schematic for information
on how to wire this type of connection.
GPI ports allow a contact closure to be used to trigger the system to Play, Pause,
Stop, Loop or Record.
Note that Loop only controls the main clip loop and not the playlist loop and that
Play will only play the clip that is currently loaded.
GPO ports can be used to communicate the state of the device such as Playing,
Paused, Stopped, Recording, Looped, Cued. They can be used to light an external
indicator LED or trigger an external device.
CHAPTER 4 – PLAY & RECORD OPERATIONS

PLAYING A CLIP

The main purpose of the Instant Replay is the instant playout of audio clips. There
are multiple ways to play clips, each having unique benefits.

Load and Play a Single Clip.

Instant Replay 3 Operations Manual Page 55