Table of Contents
Advertisement
When audio that is assigned to Hot-Keys is replaced by any means (FTP Upload or
Record Overwrite) the Hot-Key assignments will still exist, and will be assigned to
the new audio. This allows material to be updated without the need for manually
reassigning Hot-Keys. For instance, hourly promos can be named for their time slot
and day of the week. Each week the new promos can be loaded in over the
network and will appear at the same places in
Locating a Clip Using Searches
On certain management or selector screen, a search field is available. Typing a
letter or character in the field takes the selection to the first instance where the first
letter of the name is a match. Typing subsequent letter will continue this process
until no additional matches are found.
Note that searches only look in the current directly level and do not persist when
moving between directories.
In most cases, pressing the Find button on the keyboard will move the focus to the
search field.
Viewing Clip or Playlist Information
From the Home screen, pressing the CLIP INFO button will display information about
the currently loaded clip.
If the system is stopped, information about a clip or playlist can be obtained through
the Clip / Playlist Manager. Select MENU from the home screen and then CLIP
MANAGER. In the Clip / Playlist Manager, select a clip or playlist and then the FILE
INFO button.
Depending on whether a clip or playlist was selected, either the Clip Information or
Playlist Information screen will be presented.
Previewing a clip
With the system stopped, PREVIEW may be pressed at which point the main audio
outputs are muted. Clips played subsequently can be auditioned from the
headphone output only.
Both the analog and digital audio outputs remain muted until PREVIEW is
deactivated.
Looping a Clip or Playlist
Looping a clip or a playlist are separate actions. This provides a more granular
control over what is looping on the system.
To loop a clip, press the LOOP button on either the keyboard or the LOOP button in
the CLIP section of the home screen. This will cause the currently loaded clip to
loop when played. The clip will continue to loop until:
STOP is pressed. This will stop the playout but leave the LOOP button on. If
PLAY is pressed again the clip will loop again.
Instant Replay 3 Operations Manual
all
Banks and Playlists.
Page 61
Advertisement
Table of Contents
