Performing Color Evaluations; Overview - Datacolor CHECK II Quick Start Manual

The information stored includes:

Sample name

Sample type

Date/time of measurement

Instrument settings (aperture setting,
measurement condition (SCI, SCE or
Gloss), etc.

Spectral and colorimetric data

Tolerances

Performing Color Evaluations

Overview

The evaluation screen is where you
will do most of your work. At the right
is a color evaluation screen.
TIP
If the evaluation screen is not
displayed, press the Return button on
the Control Panel to return to the last
active evaluation screen.
From this screen, you can do the
following:
 Measure new samples.
Simply press the Measure button.
 Change the color evaluation being displayed. Tap the
down arrow ( ) next to CIELab for a list of selections. Tap on
an evaluation in the list.
 Change the Illuminant/Observer combination. Tap the
down arrow ( ) next to D65/10 for a list of selections. Tap on
an Ill/Obs combination in the list.
 Change the standard or batch used. Tap the arrow ( ) next
to DK BLUE STD to retrieve or measure a different standard.
Tap the arrow ( ) next to DK BLUE BAT -1A to change the
batch selection.
28  Performing Color Evaluations
CHECK II Quick Start Guide